Polyvinyl Chloride Distributor and Suppliers in India – Petromart

We are the Polyvinyl Chloride Distributor and Suppliers in India. PVC is among the three most commonly used synthetic plastic polymers, after polyethylene and polypropylene. About 40 million tons of PVC are produce annually. There are two basic types of PVC: rigid (sometimes abbreviated as PVC) and flexible. PVC is available in a rigid form for use in pipe construction and in profile applications such as doors and windows. Bottles, non-food packaging, and cards (such as bank cards or membership cards) are also made with it. Adding plasticizers can make it softer and more flexible, and phthalates are the most widely use. 

Polyvinyl Chloride Distributor and Suppliers in India

This material is use in plumbing, electrical cable insulation, imitation leather, flooring, signage, phonograph records, inflatables, and other applications. Rubber is replace by it in many applications. Canvases are made from it and cotton or linen. A pure polyvinyl chloride solid is white and brittle. Tetrahydrofuran is slightly soluble in alcohol but insoluble in alcohol.

Uses of PVC

Due to its chemical resistance to acids, salts, bases, fats, and alcohols, PVC is resistant to the corrosive effects of wastewater, which is why sewer piping systems are so commonly fabricate with it. Moreover, it is resistant to some solvents, but this applies mostly to PVC (unplasticized PVC). In some cases, PVC-P, also called plasticized PVC, is less solvent-resistant. This is due to the fact that some paint thinners and fuels are resistant to PVC. However, some solvents, such as tetrahydrofuran or acetone, may damage it as well as swell or deform it.

  • Pipes

About half of the polyvinyl chloride resin produce each year is use to make pipes for industrial and municipal use. It accounts for 66% of the water distribution market in the U.S., and 75% of the sanitary sewer pipe market. PVC bury pipes larger than 4 inches (100 mm) in diameter are typically join using a gasket-sealed joint in both water and sanitary sewer applications. North American gaskets are commonly made from metal-reinforce elastomers, which are refer to as Rieber seals. It has the advantages of being lightweight, cost-effective, and low-maintenance. In order to prevent longitudinal cracking and overbilling, it should be installed and bedded carefully. Also, PVC pipes can be conjoined using various solvent cement, or heat-fuse (butt-fusion process, similar to joining high-density polyethylene (HDPE) pipe), resulting in durable joints that are virtually leak-proof.

  • Flooring

There are many uses for flexible PVC flooring, including in homes, hospitals, offices, and schools. A clear wear layer protects complex and 3D designs. In addition, a middle layer of vinyl foam is comfortable and safe. In areas that need to remain sterile, such as hospitals and clinics, the smooth, tough surface of the upper wear layer prevents dirt from accumulating and allows microbes to breed.

  • Wire rope

Under pressure, PVC can be extrude to encase wire ropes and aircraft cables for general-purpose applications. In addition to being easier to handle, PVC coated wire rope resists corrosion and abrasion, and can be color-code for improve visibility. It can be found in a variety of industries and environments, both indoors and outdoors. Consumer products are made from PVC. It is use for the first time for mass-market vinyl records. In the recent past, examples have included wallcoverings, greenhouses, outdoor playgrounds, foam and other toys, custom truck toppers (tarpaulins), and various kinds of interior cladding. It is a common alternative to metals when making instruments, often for leisure and for more exotic instruments, such as the contrabass flute, because PVC piping is cheaper than metals.


Looking for a Polyvinyl Chloride Distributor and Suppliers in India, then connect Petromart. – We are a leading provider of lubricants, fuels, and petrochemicals. We succeed in our business because of our reputation for goodwill and trustworthiness.